An excavator hydraulic compactor is a type of attachment that is used with an excavator to compact soil, gravel, and other materials. It is a heavy-duty machine that uses hydraulic pressure to compact the materials. The compactor is mounted on the excavator arm and is operated by the excavator's hydraulic system. The compactor consists of a flat plate that is used to compress the soil or other materials. The plate is vibrated at a high frequency to increase the compaction force. The excavator hydraulic compactor is commonly used in construction, road building, and landscaping projects. It is an efficient and cost-effective way to compact large areas of soil or other materials quickly and effectively. Excavator Plate Compactor,Mini Excavator Compactor,Plate Tamper For Excavator,Excavator Compactor Attachment CATSU Hydraulic Machinery Equipment Co.,Ltd , https://www.cattiltrotator.com
Take a two-layer plastic locker as an example, you need tools: rubber hammer
The first step: the base to give up side by side, insert single and double side plates, the board has marked down, forward, the direction must not be wrong, with a rubber hammer hit back in place.
Part 2: Insert the alignment plate into the backplane.
The third part: install the connector, first snap the connector onto the side board, pay attention to the up and down direction, and knock the connector forward.
Part 4: Refer to step 1 to install the single and double side plates and then install the top plate. The top plate is knocked into place by the back.
Step 5: Install door panels, multi-function boxes, top seals and other accessories. This step is very simple. After installation, the effect is as shown below.
ABS plastic locker locker installation steps
How is the plastic locker installed?