Vertical type air handling unit
Air flow 1,000m3/h-50,000m3/h,Coil type 4rows/6rows/8rows
AMRTA air handling unit mainly constructed with filter, heat exchanger, fan motor, fan blower and other main components.
Characteristics:
Vertical Type Air Handling Unit Vertical Type Air Handling Unit,Air Handling Unit Size Calculation,Air Handling Unit,Horizontal Vertical Type Air Handling Unit Jinan Amrta Air Conditioning Co.,Ltd , https://www.amrtaac.com
The global silicon market is down by 11% in 2009 based on the area of ​​shipments, and is expected to reach 8.2 billion square inches in 2010, an increase of 17%. Among them, 300mm silicon wafers have the fastest growth rate of 27%, reaching 4.5 billion square inches (MSI), which is a 7% increase compared to 200mm wafers and below 10% for 150mm wafers.
Global wafer shipments forecast by size
1.Air handing unit applies colorful steel and galvanized panel as its interior and exterior panel. Inner stuff is the high density polyurethane foam,double pillar and tenon structure that ensures the strength of the unit and low air leakage.
2.High efficiency and low resistance nylon filter that reduce the power consumption obviously. Easy cleaning and simple operation; at the same time, higher level panel filter is optional too.
3.Coil applies pure and seamless copper tube and hydrophilic aluminum fin. Copper tube is under 12MPa water pressure expanding that can adapt to all kind of high pressure and no leakage, as well as ensure the lowest contact thermal resistance and highest heat transfer efficiency.
4.All fans in the unit are selected by professional software to ensure the best condition. Minimize the air volume and air pressure loose after meeting with the customer's requirements. Also ensure the good airflow and reduce the air duct noise.
Global demand for silicon wafers rises
According to iSuppli, with the recovery of the global semiconductor industry in 2010, its corresponding silicon wafer market has also risen. Its driving force is the word “innovationâ€.