The V-cone flowmeter can improve the velocity distribution of the fluid. The flow of fluid in the pipeline is actually such a state that when the flow has reached a fully developed state, its velocity distribution is also uneven, that is, the flow velocity is faster near the center of the pipeline. The fastest in the center. The nearer the flow velocity is, the closer to the wall, the closer to zero at the tube wall. Our company was set up in 2002.We are using the advanced cold punch technology to produce spark plug which is similar to NGK and Champion technology.With such technology, the metal shell and ceramic are better protected the quality of the spark plug are more stable to get avoid from air leaking and broken.Our spark plug products are ranged into more than 100 models with an anual out put of 6 million pcs. Besides the advanced technology,we also have a strong advantage of automatical production.Most of our production device is automatical that we have very high,efficiency and stable quality.Throughout such years of developing,we have gained a good reputation at domestic motorcycle manufacturer.Furthermore,our products have been exported to South East Asia, Middle East, Australia and so on. Revolution,refine and devotion are our principal of working.Welcome to visit us and raise your demand and your comments request are our target to strive. Double Iridium Spark Plugs,Double Platinum Spark Plugs,Ngk Double Iridium Spark Plugs,Denso Double Iridium Spark Plugs LIXIN INDUSTRIAL & TRADE CO.,Limited , https://www.jmpowerplugs.com
Most flow meters involve the flow rate of the fluid when measuring the flow rate, assuming that the flow rate of the fluid in the pipeline is equal, without considering the difference between the speed of the actual flow, which is limited by the working principle of the instrument. To do so, the results can only be sacrificed at the expense of measurement accuracy (currently multi-channel ultrasound is developed to try to resolve the inhomogeneities in flow velocity).
This uneven flow rate has been well resolved in the V-cone flowmeter . Because the V-cone flowmeter throttle is installed in the center of the pipeline, it directly separates the fluid from the center of the high-speed flow, so that the fast-flowing fluids are brought close to the fluids with slower flow speeds and pull them together to flow together. As a result, the difference between the flow velocity and the flow velocity disappears, and the fluid becomes a true uniform flow.