HDRS equipment remote monitoring system

HDRS equipment remote monitoring system

In July and July, the weather became hotter and hotter, and Changsha had been continuing to heat at 37 degrees a week for a week. The temperature of machinery and equipment will be high during operation. With high temperatures, it will be more prone to failure. For mechanical equipment manufacturers, how can we avoid equipment failures in advance without affecting production? Huachen Zhitong independently researched and developed the HDRS equipment remote monitoring system that allows you to see the running status of the equipment in the cool air-conditioned room, avoid equipment failures in advance, and save your manpower, material resources and financial resources.

烈日下设备等待工作人员检测

The following Xiaobian will explain in detail how to realize remote fault warning of mechanical equipment for remote monitoring of HDRS equipment:

HDRS equipment remote monitoring system consists of two parts: hardware (PLC remote monitoring module) and software (PLC remote monitoring platform).

HDRS远程安全通讯网关

PLC remote monitoring module

PLC远程监控平台界面

PLC remote monitoring platform

First of all, we will embed the PLC remote monitoring module into the running equipment and connect it with the equipment PLC to receive the equipment operation data. The PLC remote monitoring module can work at the temperature of -20-60 degrees and can accept -30~ 80 degrees storage temperature.

Then, you need to write the warning data or monitoring parameters you need to set to WINCC, Kingview or other PC software or PLC remote monitoring platform.

Finally, the host computer or PLC remote monitoring platform will report this data to you in real time. You can control the operation of the equipment in the office. Therefore, the HDRS equipment remote monitoring system is equivalent to a 24-hour free of charge for your equipment. Housekeeper, no matter how high temperature, you are not worried about it!

HDRS equipment remote monitoring system

Lathe Chips Remover

Cnc Turning Parts,Lathe Chips Remover,Lathe Chip Removal,Cnc Lathe Chips Remover

Ningbo junfa CNC Equipment Co. Ltd. , https://www.intimecnc.com