How to avoid the summer driving high pressure cleaning car?

Hot weather is to make high-pressure cleaning truck driver most tough season, the car after the exposure, the internal temperature is even higher than the temperature under the sun, high temperature high pressure cleaning some good method to teach a summer car factory owners:

High-pressure cleaning vehicle air-conditioning system is the most common and effective cooling facility in this season. Under high temperature conditions, air-conditioning systems should be thoroughly inspected, and the water tank, condenser, and air-conditioning filter elements should be regularly cleaned. Dust attached to the water tank and condenser will cause increased fuel consumption, slow cooling, engine overheating and so on. In addition, the air-conditioning filter element is the most easily overlooked place, its role is to filter out the dust in the air, to provide drivers with a fresh environment. If the filter element is not changed for a long time, the air supply port will be blocked and the air volume will be reduced.

When using air conditioners, it should also be gradual. When you first get in the car, a large amount of heat is gathered in the air duct. At this time, the door must be opened to allow the heat inside to spread out. After a while, the air conditioner can be opened to use air conditioners more effectively. wind.

When the high-pressure cleaning vehicle does not work, it must be parked in a cool place. The heat insulation film of the window, the front sun visor, and the cool cushion are all necessary for these basic summer equipments.

Track Cutting To Length Line

Track Cutting to Length Line suits making medium gauge metal sheets of over 1m length.

Medium gauge ranges from 1-8mm, length of finished sheets 1 -8m, line speed can be 50-60m/min, each steel coil can be cut within 30min.

Main equipments of track Cut To Length Line is leveler, servo roller measure, hydraulic track shear, auto stacker. The leveler is always running and the track shear cut sheet to length under servo length measuring.

With productivity improving demand in market, track shear is becoming popular, it can gives high production and high quality of flat sheets.

We supply custom cut to length lines to customers, make sure each cutting line work smoothly, earning profit.



Track Cutting To Length Line,Ss Sheet Cut To Length Line,Steel Sheet Track Cut To Length,Leveling Cut To Length Machine

Wuxi Jinye Complete Set of Equipment Co.Ltd. , https://www.machinejinye.com