Hf Induction Heater for Cemented Carbide Tool Brazing (XT-40)

Model NO.: XT-40
Input Voltage: 3*380V
Maximum Input Current: 60A
Rated Power: 40kw
Output Frequency: 20-80kHz
Duty Cycle: 100%
Precision: 0.1%
Cooling Method: Water Cooling
Working Theory: Electromagnetic Induction Heating
Trademark: Kechuang
Transport Package: Plywood Cases
Specification: XT-40
Origin: Zhengzhou
HS Code: 85144000
Model NO.: XT-40
Input Voltage: 3*380V
Maximum Input Current: 60A
Rated Power: 40kw
Output Frequency: 20-80kHz
Duty Cycle: 100%
Precision: 0.1%
Cooling Method: Water Cooling
Working Theory: Electromagnetic Induction Heating
Trademark: Kechuang
Transport Package: Plywood Cases
Specification: XT-40
Origin: Zhengzhou
HS Code: 85144000
HF Induction Heater for Cemented Carbide Tool Brazing (XT-40)

HF Induction Heater For  Cemented Carbide Brazing(XT-40)Technical Parameters:
 

Model type
XT-40
Input  power 40KW
Input  voltage 380V±10%  50HZ/60HZ
Max input current Single phase  60A
Oscillating  frequency 20-80KHZ
Inverted  power ≤40KW
Water  pressure 0.15MPA≤water pressure≤0.3MPA



Kechuang IGBT HF Induction Heater  General Impression:

    IGBT Braze welding machine Technique data:
    Power range: 8KVA- 1000KVA
    Frequency range: 0.5KHz- 500KHz
    Input power: Three phase 380V± 10% 50Hz
    Work pressure: 0.15MPa- 0.30MPa


Kechuang IGBT HF Induction Heater Feature:
(1) Fast heating, uniform, which can effectively prevent zigzag caused by local overheating embrittlement and fracture, but also can prevent lack of penetration cause off tooth and other bad phenomena;
(2) Suitable for welding high performance, high hardness serrated saw blade.
(3) Provide welding arts, installation simple and useful convenience.
(4) Compared to thyristor medium frequency furnace, save energy 10-30%.
(5)Can complete minimum and maximum head welding, all kinds of power, frequency for your selection.


Induction Heater Water Cooling System:
1.Technique data
Input voltage;three phase 380V±10%
Rated voltage: three phase 380V  50Hz
Cooling capacity:31100Kcal/h-1806000Kcal/h
2. Feature
Cooling water tower movement all adopt in thermal efficiency high copper tube, let the working fluid (water or other liquid) in its line through, through the fan and air for natural heat exchange, one-time finish. It is not only energy conservation and environmental protection,but also tube is clean and unobstructed, reduce the failure rate, prolong the useful life of the equipment. Closed circulating cooling reduce pipe corrosion and scaling, do not need to pool, covers an area of small, convenient to move, energy saving, simple operation.
Customer service:
Call or e-mail us any time. Before you place your order, we will be happy to discuss your detailed requirements with you and help you find a selection of machine that is just right for your market.
 

 Quick Delivery:
With your wide requested of faucets with even less than our MOQ, we are able to fulfill most requests within short days of your order.
 

 Promise :
Customers Satisfaction, provide good quality and reasonable price and constant after sale service to be engaged in 100% of us .Our Warranty period is one year.
 

 Induction Heating machine power  Selection :
You can just let us know the type, power, frequency, quenching ways, quenching hardness ,depth and materials, choosing proper frequency according to production efficiency. According to specific workpiece shape, material, welding material and so on to decide. choosing according to smelter furnace and production efficiency, choosing according to product speed, materials, temperatures and so on. If is the axial, please tell us the diameter of the axial? If you have drawings please send us. please contact us more specification.








     HF Induction Heater for Cemented Carbide Tool Brazing (XT-40)

HF Induction Heater For  Cemented Carbide Brazing(XT-40)Technical Parameters:
 

Model type
XT-40
Input  power 40KW
Input  voltage 380V±10%  50HZ/60HZ
Max input current Single phase  60A
Oscillating  frequency 20-80KHZ
Inverted  power ≤40KW
Water  pressure 0.15MPA≤water pressure≤0.3MPA



Kechuang IGBT HF Induction Heater  General Impression:

    IGBT Braze welding machine Technique data:
    Power range: 8KVA- 1000KVA
    Frequency range: 0.5KHz- 500KHz
    Input power: Three phase 380V± 10% 50Hz
    Work pressure: 0.15MPa- 0.30MPa


Kechuang IGBT HF Induction Heater Feature:
(1) Fast heating, uniform, which can effectively prevent zigzag caused by local overheating embrittlement and fracture, but also can prevent lack of penetration cause off tooth and other bad phenomena;
(2) Suitable for welding high performance, high hardness serrated saw blade.
(3) Provide welding arts, installation simple and useful convenience.
(4) Compared to thyristor medium frequency furnace, save energy 10-30%.
(5)Can complete minimum and maximum head welding, all kinds of power, frequency for your selection.


Induction Heater Water Cooling System:
1.Technique data
Input voltage;three phase 380V±10%
Rated voltage: three phase 380V  50Hz
Cooling capacity:31100Kcal/h-1806000Kcal/h
2. Feature
Cooling water tower movement all adopt in thermal efficiency high copper tube, let the working fluid (water or other liquid) in its line through, through the fan and air for natural heat exchange, one-time finish. It is not only energy conservation and environmental protection,but also tube is clean and unobstructed, reduce the failure rate, prolong the useful life of the equipment. Closed circulating cooling reduce pipe corrosion and scaling, do not need to pool, covers an area of small, convenient to move, energy saving, simple operation.
Customer service:
Call or e-mail us any time. Before you place your order, we will be happy to discuss your detailed requirements with you and help you find a selection of machine that is just right for your market.
 

 Quick Delivery:
With your wide requested of faucets with even less than our MOQ, we are able to fulfill most requests within short days of your order.
 

 Promise :
Customers Satisfaction, provide good quality and reasonable price and constant after sale service to be engaged in 100% of us .Our Warranty period is one year.
 

 Induction Heating machine power  Selection :
You can just let us know the type, power, frequency, quenching ways, quenching hardness ,depth and materials, choosing proper frequency according to production efficiency. According to specific workpiece shape, material, welding material and so on to decide. choosing according to smelter furnace and production efficiency, choosing according to product speed, materials, temperatures and so on. If is the axial, please tell us the diameter of the axial? If you have drawings please send us. please contact us more specification.








    

Machined Parts&Custom machined parts

Our company's subsidiary (Aoffide) mainly processes the following parts:

1. Processing of various mechanical parts such as military industry, petroleum, medical treatment, environmental protection, electronics, etc.

2. Design and manufacture of fixtures.

3. Design, manufacture and processing of stainless steel sheet metal processing, various workbenches, clean operation tables, and trolleys. The company owns more than 10 CNC machining centers such as Mikron from Switzerland, Mazak from Japan, Fenghe from Japan, Doosan from South Korea, Youjia from Taiwan, and Jingdiao from Beijing. It has more than 20 CNC machine tools such as Doosan, Taichung Precision Machinery, Shenyang Machine Tool, and Kingswood CNC. In addition, there are processing equipment such as electric pulse, wire cutting machine, shearing machine, bending machine and so on.

Passed the ISO9001 quality system certification in January 2015.


Machined Parts&Custom Machined Parts,Cnc Precision Machined Parts,Custom Made Cnc Machining,Cnc Automobile Parts

Jiangyin Mitoo Precise Co.,Ltd. , https://www.mitoosteel.com