Glitter Film,High Temperature Glitter Film,Holographic Rainbow Film Glitter,New Waterproof Glitter Film Shanghai Huike New Material Technology Co., Ltd. , https://www.shhuike.com
Save up to 50% Energy! Efficiency Increased by 40%! Eco-Friendly Design
Energy-Saving Servo Motor / Electronic Adjustable-Speed Motor (DSV-1)
This advanced motor is ideal for a wide range of industrial sewing machines including garments, bags, and boxes. It offers low vibration, minimal noise, and reduced temperature rise, ensuring longer operational life. The compact and lightweight design makes it easy to install. Most importantly, it consumes significantly less energy—saving 60–80% compared to traditional clutch motors.
Environmentally friendly. No noise. Perfect for modern manufacturing setups.
Fourth, Control Panel Instructions:
1. Key Functions:
(1) "P" Key
This key has two main functions. First, pressing "P" allows you to adjust the needle position. If the upper pinhole lamp lights up, the needle is in the up position; if the lower pinhole lamp lights up, it's in the down position. If both lamps are off, there is no needle position detected.
Second, it acts as the "Enter" button for accessing settings, which will be explained below.
"S" Key
This key also has two uses. The first is to turn the headlight on or off. The second is to confirm and save parameter changes, as described in point 2 below.
"+" and "-" Keys
These keys are used to adjust the motor speed.
(2) How to Enter Parameter Mode:
Example: Changing the motor rotation direction from clockwise to counterclockwise.
Step 1: Turn on the power.
Step 2: Press and hold the "P" key, then press the "+" key with your other hand. The screen will display "P-00".
Step 3: Press "+" to go to "P-01", then again to "P-02". P-02 is the parameter for setting the motor direction (clockwise or counterclockwise).
Step 4: Press the "P" key to enter the parameter mode. The screen will now show "1".
Step 5: Press the "-" key to change "1" to "0". (Note: "1" represents clockwise, while "0" represents counterclockwise.)
Step 6: Press the "S" key to save and exit the parameter settings.
3. Reset to Factory Settings:
To restore factory settings, press and hold the "P" key, then press the "+" key. The screen will show "P-00". Hold the "S" key for 3 seconds to complete the reset.
Zoyer Save Power Energy Saving Direct Driver Sewing Motor (DSV-01-766))
Model NO.: DSV-01-766
Classification: Sewing Machine Motor
Type: Servo Motor
Trademark: ZOYER
Specification: SGS Certified
Origin: Taizhou, China
Servo Motor!