Motorcycle Horn Motorcycle Parts Ybr125/Cg125/Bm150 Twin Speaker Horn

Model NO.: DL-127HLY

Warranty: 12 Months

Car Make: Universal

Certificates: E-MARK, CCC, TS/ISO 16949:2009

Diameter: 90mm

Sound Level: 105-118dB

Frequency: 360Hz ~ 420Hz

Trademark: FHL

Transport Package: 1 set / Steel Box; 30 sets / Carton

Specification: 50.5 x 27.5 x 21.5 cm

Origin: Guangzhou, China

HS Code: 8512301100 **Product Show:**



**Technical Parameters:** **Features:** 1. The horn has been tested in our laboratory and delivers at least 110dB of sound, ensuring maximum visibility and safety on the road. 2. It provides a powerful, long-range sound that reduces the risk of traffic accidents by enhancing driver awareness. 3. Made with imported high-quality manganese steel, the horn produces a full, clear "BABA~~" sound. 4. Uses advanced Teflon coating technology to make it dustproof and waterproof (note: no other factory can produce a fully waterproof universal horn). This significantly extends its lifespan. 5. The horn bulb is made from 100% ABS material, which is heat-resistant, impact-resistant, and corrosion-resistant, protecting it from engine heat and damage. It also has high hardness and can withstand drops from 1 meter without breaking. **Installation & Usage Notes:** a. Install at a 45-degree angle or downward to prevent water from entering the coil directly. b. Do not change the angle of the steel support unless you are a professional, as this may affect the air gap. c. The torque for the steel support should be between 6Nm and 11Nm. d. Mount the horn on a solid surface to avoid resonance. e. Ensure the horn is installed in a wide, ventilated area and away from other parts of the vehicle. f. The product has no polarity requirements, so the wire connection must be secure. Double horns should be mounted parallel on a solid part of the car body. g. Keep the horn away from the engine and areas with high radiation. Avoid mounting it too low. h. Do not keep the horn activated for more than 60 seconds, as this may cause the coil to burn out. i. Use copper wires with a diameter of at least 1.5mm and ensure the wire length is less than 4 meters. j. The standard voltage is 12V, with an input current of over 30A. Our company is a professional manufacturer and exporter specializing in the design, development, and production of automotive parts. We are committed to creating technologically advanced and reliable auto components for global customers. **Factory Show:**
**Exhibition:**
**Related Items:**
**Contact Us:** Guangzhou Jindong Electronic Technology Co., Ltd. Address: No.1, Gudong Industrial Zone, Gulong Road, Shawan Township, Panyu District, Guangzhou Zoila Yip Tel: +86-020-34738085 Mob: +86-13928707496 Fax: +86-020-84737552

Silicone Tube Extrusion Line

Silicone Tube Extrusion Line,Hose Extruder Machine,Silicone Pipe Extrusion Machine,Pipe Make Production Line

Hebei Shuangda Rubber & Plastic Machinery Co., Ltd. , https://www.shuangdarubber.com