Pneumatic Axial Valve NPT Thread Ends
Pneumatic Axial Valve with NPT Thread Ends
Technical Data:
Advantages:
- Compact design with high flow capacity
- Excellent sealing performance, vacuum tightness up to 740mmHg (Mercury)
- Suitable for any mounting position (horizontal, vertical, oblique)
Size: DN8 - DN50 (1/4" ~ 2")
Connection: BSP or NPT threaded
Control Type: Single acting, double acting
Body Material: CF8M (AISI 316) or CF8 (AISI 304)
Seat Options:
- **EPDM**: Ideal for steam and hot water, not recommended for oils, greases, or fuels.
- **VITON (FKM)**: Suitable for most fluids, but not for steam.
Additional Technical Parameters:
- Fluid Pressure: Max 1.0MPa (10bar, 232Psi)
- Fluid Temperature: -10°C to +130°C
- Max Viscosity: 600 mm²/s
- Control Fluid: Neutral gas, air
- Control Pressure: 0.3 - 0.8MPa
CONTACT US
Model NO.: 200 Series
Ambient Temperature: -20ºC - +80ºC
Control Type: Normally Closed, Normally Open, Double Acting
Connection: Threaded (BSP, BSPT, NPT)
Trademark: ESG
Transport Package: Seaworthy or Airworthy
Specification: CE, ISO9001, CU-TR
Origin: China
HS Code: 8481
Technical Data:
| Fluid Pressure | Max 1.6MPa (232Psi) |
| Control Pressure | 0.3 - 0.8MPa (43.5-116psi) |
| Control Fluid | Neutral gas, air |
| Body Material | CF8M / CF8 |
| Seals Material | EPDM / FKM |
| Applicable Fluid | FKM – suitable for most fluids, except steam. EPDM – suitable for steam and hot water, not suitable for oils, greases, fuels, etc. |
| Fluid Temperature | -20ºC to +150ºC |
| Ambient Temperature | -20ºC to +80ºC |
| Control Type | Normally closed, normally open, double acting |
| Connection | Threaded (BSP, BSPT, NPT) |
Advantages:
- Compact design with high flow capacity
- Excellent sealing performance, vacuum tightness up to 740mmHg (Mercury)
- Suitable for any mounting position (horizontal, vertical, oblique)
Size: DN8 - DN50 (1/4" ~ 2")
Connection: BSP or NPT threaded
Control Type: Single acting, double acting
Body Material: CF8M (AISI 316) or CF8 (AISI 304)
Seat Options:
- **EPDM**: Ideal for steam and hot water, not recommended for oils, greases, or fuels.
- **VITON (FKM)**: Suitable for most fluids, but not for steam.
Additional Technical Parameters:
- Fluid Pressure: Max 1.0MPa (10bar, 232Psi)
- Fluid Temperature: -10°C to +130°C
- Max Viscosity: 600 mm²/s
- Control Fluid: Neutral gas, air
- Control Pressure: 0.3 - 0.8MPa
CONTACT US
Capsule Filling Machine,Powder Capsule Filling Machine,Ready Stock Automatic Capsule Filler,Fully Automatic Capsule Filling Machine
Jiangyin Longchang Machinery Manufacturing Co,Ltd , https://www1.jylongchanggrinderline.com