Dongfeng Tianjin Guowu compressed garbage truck chassis configuration: 4×2 drive, D530 flat head one row semi-standard top cab, Dongfeng Cummins ISD180 50 engine (WHTC), wheelbase 4500mm, 860mm wide frame, resistance heating cold starter , all steel 160L fuel tank, fuel tank lock (three locks one), electronic accelerator pedal and switch, two-stage fuel filter series (complete vehicle level, engine level), muffler side exhaust port orientation Side blow, Φ395mm push-type diaphragm spring clutch, Dongfeng 6-speed DF6S900 gearbox (head speed ratio 7.967), the highest grade is overspeed, 4.5T front axle, 9T single-stage deceleration rear axle, main reduction ratio 5.286, flange Part of the power (take power on the gearbox) power take-off, frame longitudinal section size 250 × 80 × [7 + 4] mm, leaf spring number 7 / 9 + 6, 9.00R20 radial tire, automatic adjustment arm , Dongfeng Technology ABS (4 channels), semi-floating cab suspension, hydraulic mechanical flip, channel type instrument panel, air conditioning, no cruise system, remote throttle and PTO interface, remote throttle switch, no device, pre- Reserved interface - for the 12 version of the drive recorder and Beidou terminal. (This article comes from Xiagong Chusheng) The mask body machine, also known as the mask filming machine, is a machine for the automated production of multi-layer flat mask products. It can use 1 to 4 layers of PP spunbond non-woven activated carbon and filter materials. The entire machine is fed from raw materials. The nose line insertion, edge banding, and cutting of the finished product are all automated operations in one line. Depending on the raw materials used, it can reach different standards such as N95, FFP2 and so on. The flat mask production equipment has stable performance, high output, low defect rate and easy operation. Ffp2 Mask Machine,Ffp3 Mask Machine,Respirator Machine,Solid Mask Machine Broadfair Automation Equipment Co., Ltd. , https://www.broadfairmachine.com
