Wireless Remote Control,Grab Crane,Hydraulic Grab Guanhai Engineering Machinery Technology Co., Ltd. , http://www.jncagesystem.com
2CY gear pump installation method
2CY gear pump installation method: 1,2 CY gear pump before installation should check whether the pump and motor damage during transport, such as the motor is damp, the import and export of dust pump cover is damaged so that dirt into the pump cavity. 2,2 CY gear pump during handling, should choose the appropriate lifting position, reducing the deformation of the pump. 3,2 CY gear pump base should be fixed on a solid foundation, so as to avoid vibration affect the pump's normal work. 4,2 CY gear pump import and export piping should be cleaned and kept without hard particles and other debris. 5, the pipe diameter is generally not less than the import and export of pumps caliber, into the pipeline should be as short as possible and reduce detours. If necessary, install a metal filter in the oil inlet, and the effective area of ​​the filter should not be less than three times the area of ​​the pipe overcurrent. 6, the installation, the pump can not be used to bear the weight of the pipeline. 7, rotating the coupling by hand, the pump should be flexible rotation, not too tight or uneven, should be immediately ruled out. 2CY gear pump mainly gear, shaft, pump, pump cover, bearing sleeve, shaft seal and other components. Nitriding gear has a higher hardness and wear resistance. Install with shaft in replaceable sleeve. The lubrication of all parts in the pump is automatically achieved by the use of conveying medium while the pump is in operation. 2CY gear pump four bearing sleeve floating installed in the pump, with the work of the pressure automatically adjust the size of the gap between the end, so the pump pressure stability, the output flow pulsation, the high efficiency of the solution. From the spindle extension to the pump to see, clockwise rotation.