How to save fuel in the operation of aerial vehicles

Aerial often work in harsh environment, it will cause big fuel consumption, it is not worth, here to tell you what should the proper use of aerial work platforms in order to achieve the effect of fuel-efficient

1. The slipping of the clutch on the aerial vehicle will cause the engine's revolution to be lost. When you find rapid acceleration aerial engine tachometer increased rapidly, but the increase is very slow speed, then the clutch slip may be determined.

Tip: Need to replace clutch plate, clutch platen and drive

2. If you find abnormal sounding of the wheels of the aerial vehicles during driving or starting, you should check the bearing and brake system for failure. If the wheels rotate abnormally, it will affect the speed of the vehicle and increase fuel consumption.

3. Check the wear level of the aerial tires. If the tires are worn badly, slipping will often occur, increasing fuel consumption.

STF164 Series Alternator Suppliers
The insulation system is class 'H'.
All wound components are impregnated with materials and processes designed specifically to provide the high build
required for static windings and the high mechanical strength required for rotating components.
All generator stators are wound to 2/3 pitch. This eliminates triple (3rd,9th,15th) harmonics on the voltage waveform
and is found to be the optimum design for trouble-free supply of non-linear loads. The 2/3 pitch design avoids
excessive neutral currents sometimes seen with higher winding pitches, when in parallel with the mains. A fully
connected damper winding reduces oscillations during paralleling. This winding, with the 2/3 pitch and carefully

selected pole and tooth designs, ensures very low waveform distortion.

Brushless Alternator


STF164 Series Copy Stamford Brushless Alternator

Copy Stamford Brushless Alternator,Three Phase Brushless Alternator,15 Kva Generator 3 Phase,11 Kva Alternator